Lapp 2 Damarlı Ekranlı CY Kontrol Kablosu, PVC Kılıflı, 20 AWG
Teknik Belgeler
Özellikler
Marka
LappSeri
ÖLFLEX CLASSIC 100 CY
Mihverlerin Sayısı
2
Kesit Alanı
0.5 mm²
Ekranlanmış/Ekranlanmamış
Ekranlı
Uzunluk
50m
Kontrol Kablosu Tipi
CY
Kılıf Rengi
Saydam
Amerikan Tel Ölçüsü
20 AWG
CPR Certification
Eca
Dış Çap
7mm
Kılıf Malzemesi
Polivinil Klorür PVC
İletken Direnci
39,6 Ω/km
Yalıtım Malzemesi
PVC
Akım Değeri
9 A
Minimum Çalışma Sıcaklığı
-40°C
Dolgu Malzemesi
Fitilsiz Dolgu
Çekirdek Telleri
16/0,20 mm
Minimum Bükme Yarıçapı
Sabit - 6 x D Çok Az Bükülebilir - 20 x D
İletken Malzemesi
Bakır
Gerilim Değeri
300/500 V
Yataklama Malzemesi
PVC
Toprak Kablosu
Yes
Ekran Tipi
Kalaylı Bakır Örgü
Maksimum Çalışma Sıcaklığı
+80°C
Ürün Ayrıntıları
Ölflex® Classic 100CY
From Lapp, the ÖLFLEX® Classic 100 CY cable is a connecting and control cable for flexible use and fixed installation for medium mechanical use. It features a high degree of screening, with a tinned copper braid shield that makes it suitable for use in EMC sensitive environments.
The cables also features a PVC sheath that is flame retardant, oil resistant and has a good resistance to chemical media. At room temperature, it is resistant against acids, caustics solutions and certain oils.
Olflex Classic 100 CY has a small diameter is suitable for use in dry, damp and wet rooms, and can only be installed outdoors with UV protection and in observation of the temperature range.
Features and Benefits
• EMC compliant
• Flame retardant
• Oil resistant
• Chemical resistant
• Small cable diameter
Applications
ÖLFLEX® Classic 100 CY cables are used as supply and interconnecting cable for controlling machine tools, production lines, control equipment on conveyors. They can also be used in measuring regulating and computer units. They are often used in;
• Plant engineering
• HVAC systems
• Conveyor systems
• Servo drives
Cable Construction
• Design: in accordance to HD 21.13S1 that is VDE 0281-13
• Conductor: bare copper, fine wire strand in accordance to IEC 60 228 that is VDE 0295, class 5
• Core insulation: LAPP special PVC compound P8/1, better than the PVC compound TI2 in accordance to VDE 0207 part 4
• Identification: up to 5 cores are colour coded in accordance to HD 186 resp. VDE 0293, with green/yellow ground conductor
• Inner sheath: PVC compound TM2 in accordance to VDE 0281-1
• Screen: Braid of tinned copper, coverage 85%. Transfer impedance in accordance to HD21.13 S1 250mΩ/m at 30 MHz
• Outer sheath: PVC compound TM2 in accordance to VDE 0207 part with increased request to LAPP specification
Accessories
Olflex Classic CY cables should be used alongside accessories that match their capabilities. As such, Lapp provides a range of EMC compliant cable glands.
• 560-701 is an M25 Skintop EMC compliant Cable Gland
• 560-713 is an M32 Skintop EMC compliant Cable Gland
• 560-694 is an M40 Skintop EMC compliant Cable Gland
Standards
This cable confirms to ECD 73/23/EEC (low voltage directive).
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
LappSeri
ÖLFLEX CLASSIC 100 CY
Mihverlerin Sayısı
2
Kesit Alanı
0.5 mm²
Ekranlanmış/Ekranlanmamış
Ekranlı
Uzunluk
50m
Kontrol Kablosu Tipi
CY
Kılıf Rengi
Saydam
Amerikan Tel Ölçüsü
20 AWG
CPR Certification
Eca
Dış Çap
7mm
Kılıf Malzemesi
Polivinil Klorür PVC
İletken Direnci
39,6 Ω/km
Yalıtım Malzemesi
PVC
Akım Değeri
9 A
Minimum Çalışma Sıcaklığı
-40°C
Dolgu Malzemesi
Fitilsiz Dolgu
Çekirdek Telleri
16/0,20 mm
Minimum Bükme Yarıçapı
Sabit - 6 x D Çok Az Bükülebilir - 20 x D
İletken Malzemesi
Bakır
Gerilim Değeri
300/500 V
Yataklama Malzemesi
PVC
Toprak Kablosu
Yes
Ekran Tipi
Kalaylı Bakır Örgü
Maksimum Çalışma Sıcaklığı
+80°C
Ürün Ayrıntıları
Ölflex® Classic 100CY
From Lapp, the ÖLFLEX® Classic 100 CY cable is a connecting and control cable for flexible use and fixed installation for medium mechanical use. It features a high degree of screening, with a tinned copper braid shield that makes it suitable for use in EMC sensitive environments.
The cables also features a PVC sheath that is flame retardant, oil resistant and has a good resistance to chemical media. At room temperature, it is resistant against acids, caustics solutions and certain oils.
Olflex Classic 100 CY has a small diameter is suitable for use in dry, damp and wet rooms, and can only be installed outdoors with UV protection and in observation of the temperature range.
Features and Benefits
• EMC compliant
• Flame retardant
• Oil resistant
• Chemical resistant
• Small cable diameter
Applications
ÖLFLEX® Classic 100 CY cables are used as supply and interconnecting cable for controlling machine tools, production lines, control equipment on conveyors. They can also be used in measuring regulating and computer units. They are often used in;
• Plant engineering
• HVAC systems
• Conveyor systems
• Servo drives
Cable Construction
• Design: in accordance to HD 21.13S1 that is VDE 0281-13
• Conductor: bare copper, fine wire strand in accordance to IEC 60 228 that is VDE 0295, class 5
• Core insulation: LAPP special PVC compound P8/1, better than the PVC compound TI2 in accordance to VDE 0207 part 4
• Identification: up to 5 cores are colour coded in accordance to HD 186 resp. VDE 0293, with green/yellow ground conductor
• Inner sheath: PVC compound TM2 in accordance to VDE 0281-1
• Screen: Braid of tinned copper, coverage 85%. Transfer impedance in accordance to HD21.13 S1 250mΩ/m at 30 MHz
• Outer sheath: PVC compound TM2 in accordance to VDE 0207 part with increased request to LAPP specification
Accessories
Olflex Classic CY cables should be used alongside accessories that match their capabilities. As such, Lapp provides a range of EMC compliant cable glands.
• 560-701 is an M25 Skintop EMC compliant Cable Gland
• 560-713 is an M32 Skintop EMC compliant Cable Gland
• 560-694 is an M40 Skintop EMC compliant Cable Gland
Standards
This cable confirms to ECD 73/23/EEC (low voltage directive).