Legris Pirinç Küresel Vana, 1/4 inç G
Teknik Belgeler
Özellikler
Marka
LegrisTip
2 Yönlü
Bilya Malzemesi
Pirinç
Bağlantı Tipi
Dişli
Konu Standart
BSPP
Diş Boyutu
1/4inç
Gövde Malzemesi
Pirinç
Şununla Kullanım için Güvenli
Su
Kol Tipi
Kol
Kol Malzemesi
Zinc Alloy
Maximum Working Pressure psi
580psi
Maximum Working Pressure (psi)
580psi
Maximum Working Pressure bar
40bar
Çalışma Basıncı
40bar
Maximum Working Pressure (bar)
40bar
Menşe
France
Ürün Ayrıntıları
Quarter-turn Valve, Standard
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.131,95 TL
Each (KDV Hariç)
1.358,34 TL
Each KDV Dahil
1
1.131,95 TL
Each (KDV Hariç)
1.358,34 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 1.131,95 TL |
| 5 - 9 | 1.097,64 TL |
| 10+ | 1.067,09 TL |
Teknik Belgeler
Özellikler
Marka
LegrisTip
2 Yönlü
Bilya Malzemesi
Pirinç
Bağlantı Tipi
Dişli
Konu Standart
BSPP
Diş Boyutu
1/4inç
Gövde Malzemesi
Pirinç
Şununla Kullanım için Güvenli
Su
Kol Tipi
Kol
Kol Malzemesi
Zinc Alloy
Maximum Working Pressure psi
580psi
Maximum Working Pressure (psi)
580psi
Maximum Working Pressure bar
40bar
Çalışma Basıncı
40bar
Maximum Working Pressure (bar)
40bar
Menşe
France
Ürün Ayrıntıları
Quarter-turn Valve, Standard
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.