Teknik Belgeler
Özellikler
Marka
LegrisKonnektör A
R 1/4
Konnektör B
İterek Sokma 10 mm
Pnömatik Bağlantı Elemanı Tipi
Düz Dişli Adaptör
Bağlantı Stili
Dişli - Boru
Dişli Bağlantı
R 1/4 Erkek
Üretici Serisi
LF3000
Dişli Malzemesi
Nikel Kaplamalı Pirinç
Maksimum Çalışma Sıcaklığı
+80°C
Maksimum Çalışma Basıncı
20 bar
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Minimum Çalışma Sıcaklığı
-20°C
Montaj Tipi
Sıralı
Menşe
France
Ürün Ayrıntıları
Straight Adaptor - Male Taper Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3175 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
198,708 TL
Each (In a Pack of 2) KDV Hariç
238,45 TL
Each (In a Pack of 2) KDV Dahil
2
198,708 TL
Each (In a Pack of 2) KDV Hariç
238,45 TL
Each (In a Pack of 2) KDV Dahil
2
Toptan Satın Al
Miktar | Birim Fiyat | Per Paket |
---|---|---|
2 - 8 | 198,708 TL | 397,42 TL |
10 - 18 | 192,625 TL | 385,25 TL |
20+ | 186,543 TL | 373,09 TL |
Teknik Belgeler
Özellikler
Marka
LegrisKonnektör A
R 1/4
Konnektör B
İterek Sokma 10 mm
Pnömatik Bağlantı Elemanı Tipi
Düz Dişli Adaptör
Bağlantı Stili
Dişli - Boru
Dişli Bağlantı
R 1/4 Erkek
Üretici Serisi
LF3000
Dişli Malzemesi
Nikel Kaplamalı Pirinç
Maksimum Çalışma Sıcaklığı
+80°C
Maksimum Çalışma Basıncı
20 bar
Gövde Malzemesi
Nikel Kaplamalı Pirinç
Minimum Çalışma Sıcaklığı
-20°C
Montaj Tipi
Sıralı
Menşe
France
Ürün Ayrıntıları
Straight Adaptor - Male Taper Thread
A high-quality polymer push in fitting suitable for compressed air applications. The LF3000 fittings can be used in systems with a working pressure from a vacuum of 0.9 bar to a positive pressure of 20 bar. These fittings are suitable for use with all plastic pneumatic plastic tubing and are 100% leak tested during manufacture.
The 3175 fittings allow plastic pneumatic tubing to be connected to threaded ports. They can be tightened with a socket wrench or adjusted using an Allen key internally.