Teknik Belgeler
Özellikler
Marka
MolexKonnektör 1
QF-50 IDC
Şerit Kablo Tipi
Düz
Konnektör 2
QF-50 IDC
Konnektör 1 Cinsiyet
Dişi
Yolların Sayısı
10
Konnektör 2 Cinsiyet
Dişi
Seri
92321
Uzunluk
400mm
Kılıf Rengi
Gri
Tellerin Boyutu
7
Karşılanan Standartlar
UL 2651
Menşe
Poland
Ürün Ayrıntıları
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.
1.27mm Molex QF-50 Single Beam Ribbon Cable Connectors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
142,417 TL
Each (In a Pack of 2) KDV Hariç
170,90 TL
Each (In a Pack of 2) KDV Dahil
2
142,417 TL
Each (In a Pack of 2) KDV Hariç
170,90 TL
Each (In a Pack of 2) KDV Dahil
2
Teknik Belgeler
Özellikler
Marka
MolexKonnektör 1
QF-50 IDC
Şerit Kablo Tipi
Düz
Konnektör 2
QF-50 IDC
Konnektör 1 Cinsiyet
Dişi
Yolların Sayısı
10
Konnektör 2 Cinsiyet
Dişi
Seri
92321
Uzunluk
400mm
Kılıf Rengi
Gri
Tellerin Boyutu
7
Karşılanan Standartlar
UL 2651
Menşe
Poland
Ürün Ayrıntıları
Molex 1.27mm QF-50 Single Beam IDC Ribbon Cable Connectors
1.27mm QF-50 IDC single beam vertical MIL/DIN version ribbon cable/wire trap female connectors with an upper housing pre-loaded with gold plated phosphor bronze IDC contacts. These QF-50 single beam ribbon cable/wire trap connectors are fully shrouded with a 90 degree cable entry angle and black UL94V-0 polyester housings which are fully polarized to ensure accurate mating. The mating pitch of these QF-50 single beam IDC ribbon cable connectors is 2.54mm, the termination interface is 1.27mm and accepts ribbon cable with a 26-28 AWG wire size.
Part numbers 92321-1xxx are QF-50 to QF-50 cable assemblies terminated by two female QF-50 connectors with a 28 AWG, 1.27mm pitch and a 7 strand ribbon cable. These QF-50 to QF-50 cable assemblies are available with a variety of connector sizes and ribbon cable lengths.