Teknik Belgeler
Özellikler
Marka
Philips LightingVat Miktarı
70 W
Lamba Tabanı
ES/E27
Lamba Şekli
Eliptik
SON Tipi
SON
Dahili Ateşleyici
Yes
Lamba Kaplaması
Yayınık
Uzunluk
156 mm
Çap
71mm
Aydınlatma Gücü
5600 lm
Işıksal Verim
80lm/W
Renk İşleme
25
Renk Sıcaklığı
2000K
AB Enerji Verimliliği Değerlendirmesi
A+
Ürün Ayrıntıları
Elliptical SON-E
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Philips LightingVat Miktarı
70 W
Lamba Tabanı
ES/E27
Lamba Şekli
Eliptik
SON Tipi
SON
Dahili Ateşleyici
Yes
Lamba Kaplaması
Yayınık
Uzunluk
156 mm
Çap
71mm
Aydınlatma Gücü
5600 lm
Işıksal Verim
80lm/W
Renk İşleme
25
Renk Sıcaklığı
2000K
AB Enerji Verimliliği Değerlendirmesi
A+
Ürün Ayrıntıları
Elliptical SON-E
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.