Phoenix Contact STTB 2.5-PE Serisi Çift Katlı Klemens, Yaylı Kelepçe
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Yeşil/Sarı
Seviyelerin Sayısı
Çift
Seri
STTB 2.5-PE
Amerikan Tel Ölçüsü
28 → 12Amerikan Kablo Ölçüsü
Sonlandırma Yöntemi
Yaylı Kelepçe
Kablo CSA
0.08 - 4mm²
Minimum Çalışma Sıcaklığı
-50°C
Maksimum Çalışma Sıcaklığı
+110°C
Karşılanan Standartlar
cRUus, GL, PCT, VDE
Model Numarası
STTB 2,5-PE
Menşe
Germany
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
5
Teklif İsteyiniz
5
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Yeşil/Sarı
Seviyelerin Sayısı
Çift
Seri
STTB 2.5-PE
Amerikan Tel Ölçüsü
28 → 12Amerikan Kablo Ölçüsü
Sonlandırma Yöntemi
Yaylı Kelepçe
Kablo CSA
0.08 - 4mm²
Minimum Çalışma Sıcaklığı
-50°C
Maksimum Çalışma Sıcaklığı
+110°C
Karşılanan Standartlar
cRUus, GL, PCT, VDE
Model Numarası
STTB 2,5-PE
Menşe
Germany
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².