PTIO sensor terminal block 1.5mm grey
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Üçlü
Amerikan Tel Ölçüsü
26 → 14Amerikan Kablo Ölçüsü
Seri
PTIO 1.5/S/3
Sonlandırma Yöntemi
İterek Sokma
Kablo CSA
1.5mm²
Gerilim Değeri
250 V
Akım Değeri
13.5A
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
CSA, cUL, cULus, EAC, UL
Model Numarası
PTIO 1,5/S/3
Menşe
Poland
Ürün Ayrıntıları
PTIO Sensor/Actuator, DIN rail terminal blocks - Phoenix Contact
PTIO DIN rail terminal blocks from Phoenix Contact are effortless push-in connection terminal blocks. These terminal blocks are small, save time with push-in technology and are designed to be used with modern machines for sensing/actuators. Although they're small in size, these devices are designed to mount onto DIN rails that are sized NS 35/7.5 or NS 35/15 and can accept an AWG of 26-14. Housings are made from a strong yet durable polyamide material.
Colours on the conductor entrance easily help you wire correctly and assist you with what conductor should go into what port.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
5
Teklif İsteyiniz
5
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Üçlü
Amerikan Tel Ölçüsü
26 → 14Amerikan Kablo Ölçüsü
Seri
PTIO 1.5/S/3
Sonlandırma Yöntemi
İterek Sokma
Kablo CSA
1.5mm²
Gerilim Değeri
250 V
Akım Değeri
13.5A
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
CSA, cUL, cULus, EAC, UL
Model Numarası
PTIO 1,5/S/3
Menşe
Poland
Ürün Ayrıntıları
PTIO Sensor/Actuator, DIN rail terminal blocks - Phoenix Contact
PTIO DIN rail terminal blocks from Phoenix Contact are effortless push-in connection terminal blocks. These terminal blocks are small, save time with push-in technology and are designed to be used with modern machines for sensing/actuators. Although they're small in size, these devices are designed to mount onto DIN rails that are sized NS 35/7.5 or NS 35/15 and can accept an AWG of 26-14. Housings are made from a strong yet durable polyamide material.
Colours on the conductor entrance easily help you wire correctly and assist you with what conductor should go into what port.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.