Teknik Belgeler
Özellikler
Genişletilebilir
No
Örgülü
Yes
Dielektrik Dayanımı
1kV
Duvar Kalınlığı
0.35mm
Yangın Davranışı
Halojensiz, Kendi kendine sönen
Malzeme
Fiberglas
Manşon Uzunluğu
5m
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+300°C
Renk
Doğal
Minimum Kablo Çapı
6mm
Manşon Çapı
6mm
Karşılanan Standartlar
IEC 60684, RoHS Uyumlu, UL 1441, UL E151092
Marka
RS ProMenşe
Spain
Ürün Ayrıntıları
LED Resonant Driver Evaluation Board, STMicroelectronics
The STEVAL-ILL038V2 is an Evaluation Board that implements a 100W LED switched-mode power supply (SMPS). It is based on the L6585DE, which embeds a high performance transition mode (TM) power factor correction (PFC) controller, half-bridge (HB) controller and all the relevant drivers required to build a combination IC.
Half-bridge over-current feature with frequency increase and PFC overvoltage, allow designers to build a reliable, flexible solution with a reduced component count.
LED Drivers, Lighting ICs, STMicroelectronics
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
![sticker-359](https://cms.rsdelivers.com/repository-v1/yeniiyifiyat.gif)
P.O.A.
1
![sticker-359](https://cms.rsdelivers.com/repository-v1/yeniiyifiyat.gif)
Teknik Belgeler
Özellikler
Genişletilebilir
No
Örgülü
Yes
Dielektrik Dayanımı
1kV
Duvar Kalınlığı
0.35mm
Yangın Davranışı
Halojensiz, Kendi kendine sönen
Malzeme
Fiberglas
Manşon Uzunluğu
5m
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+300°C
Renk
Doğal
Minimum Kablo Çapı
6mm
Manşon Çapı
6mm
Karşılanan Standartlar
IEC 60684, RoHS Uyumlu, UL 1441, UL E151092
Marka
RS ProMenşe
Spain
Ürün Ayrıntıları
LED Resonant Driver Evaluation Board, STMicroelectronics
The STEVAL-ILL038V2 is an Evaluation Board that implements a 100W LED switched-mode power supply (SMPS). It is based on the L6585DE, which embeds a high performance transition mode (TM) power factor correction (PFC) controller, half-bridge (HB) controller and all the relevant drivers required to build a combination IC.
Half-bridge over-current feature with frequency increase and PFC overvoltage, allow designers to build a reliable, flexible solution with a reduced component count.