RS PRO Kapasitör Montaj Kelepçesi, Naylon, 30 mm Çap Kapasitör İle Kullanım
Teknik Belgeler
Özellikler
Marka
RS ProAksesuar Tipi
Klips
Şununla Birlikte Kullanım İçin
30 mm Çap Kapasitör
Malzeme
Naylon
Çap
30mm
Uyumlu Kondansatör Çapı
30mm
Uyumlu Kondansatör Şekilleri
Silindirik
Klips Çapı
30mm
Menşe
United Kingdom
Ürün Ayrıntıları
Nylon Mounting Clamps
These RS brand clamps are designed to securely hold tubular capacitor components in place, offering connection protection from physical stresses such as vibration or shock. The advantage of the nylon design of this product is that it is less abrasive on the insulating sleeve of the capacitor, meaning that it is well suited where vibration is a factor.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
Accessories
This selection of mounting clips is designed to support and help prevent component failure caused by vibration and mechanical shock.
417,31 TL
83,462 TL Each (In a Pack of 5) (KDV Hariç)
500,77 TL
100,154 TL Each (In a Pack of 5) KDV Dahil
5
417,31 TL
83,462 TL Each (In a Pack of 5) (KDV Hariç)
500,77 TL
100,154 TL Each (In a Pack of 5) KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
5
Stok bilgileri geçici olarak kullanılamıyor.
| Miktar | Birim Fiyat | Per Paket |
|---|---|---|
| 5 - 45 | 83,462 TL | 417,31 TL |
| 50 - 95 | 81,142 TL | 405,71 TL |
| 100 - 245 | 79,054 TL | 395,27 TL |
| 250+ | 76,966 TL | 384,83 TL |
Teknik Belgeler
Özellikler
Marka
RS ProAksesuar Tipi
Klips
Şununla Birlikte Kullanım İçin
30 mm Çap Kapasitör
Malzeme
Naylon
Çap
30mm
Uyumlu Kondansatör Çapı
30mm
Uyumlu Kondansatör Şekilleri
Silindirik
Klips Çapı
30mm
Menşe
United Kingdom
Ürün Ayrıntıları
Nylon Mounting Clamps
These RS brand clamps are designed to securely hold tubular capacitor components in place, offering connection protection from physical stresses such as vibration or shock. The advantage of the nylon design of this product is that it is less abrasive on the insulating sleeve of the capacitor, meaning that it is well suited where vibration is a factor.
The diameter of these clamps are approximate and it is possible for the clip to compress or expand to allow for small variations in capacitor case size. The clamps can be used for either surface or central mounting.
Screws and nuts are not supplied.
Accessories
This selection of mounting clips is designed to support and help prevent component failure caused by vibration and mechanical shock.