Seeit FLYPRO-SP8B, Evrensel Programlayıcı / Fotokopi Makinesi
Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı / Fotokopi Makinesi
Şununla Birlikte Kullanım İçin
DataFlash, Seri EEPROM, Seri SPI FLASH, ZIF40 Soket ve ICSP Kablo
Arabirim
USB
Programcı Adı
FLYPRO-SP8-B
Bellek Türü Programlanmış
EEPROM, FLASH
Menşe
China
Ürün Ayrıntıları
FLYPRO-SP8B EEPROM/FLASH Programmer
The FLYPRO-SP8-B from Seeit is a programmer designed for serial EEPROM and serial FLASH devices. It features a ZIF40 socket, an ICSP cable and a USB port. A full list of over 7000 compatible devices can be found on the datasheet.
Most i2C EEPROMs and ISP FLASHs memory is stored in the FLYPRO-SP8-B programmer library. It also supports DataFlash memory.
Simply connect your FLYPRO-SP8B to a compatible PC or laptop via its USB port, without the need for an additional power supply. A mass production mode is also available. The FLYPRO-SP8B automatically begins programming when it detects that the chips are placed correctly.
The ZIF40 socket can be used to programme the devices or alternatively the HE10 connector with the ICSP cable (provided).
PC Based Programmers
10.954,22 TL
10.954,22 TL 1 Box of 1 (KDV Hariç)
13.145,06 TL
13.145,06 TL 1 Box of 1 KDV Dahil
1
10.954,22 TL
10.954,22 TL 1 Box of 1 (KDV Hariç)
13.145,06 TL
13.145,06 TL 1 Box of 1 KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
SeeitAksesuar Tipi
Evrensel Programlayıcı / Fotokopi Makinesi
Şununla Birlikte Kullanım İçin
DataFlash, Seri EEPROM, Seri SPI FLASH, ZIF40 Soket ve ICSP Kablo
Arabirim
USB
Programcı Adı
FLYPRO-SP8-B
Bellek Türü Programlanmış
EEPROM, FLASH
Menşe
China
Ürün Ayrıntıları
FLYPRO-SP8B EEPROM/FLASH Programmer
The FLYPRO-SP8-B from Seeit is a programmer designed for serial EEPROM and serial FLASH devices. It features a ZIF40 socket, an ICSP cable and a USB port. A full list of over 7000 compatible devices can be found on the datasheet.
Most i2C EEPROMs and ISP FLASHs memory is stored in the FLYPRO-SP8-B programmer library. It also supports DataFlash memory.
Simply connect your FLYPRO-SP8B to a compatible PC or laptop via its USB port, without the need for an additional power supply. A mass production mode is also available. The FLYPRO-SP8B automatically begins programming when it detects that the chips are placed correctly.
The ZIF40 socket can be used to programme the devices or alternatively the HE10 connector with the ICSP cable (provided).