Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
10
Sıraların Sayısı
1
Cinsiyet
Dişi
Hatve
2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
IDC
Akım Değeri
5A
Kontak Kaplaması
Nikel üstüne Kalay
Seri
MTA-100
Minimum Çalışma Sıcaklığı
-55.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Gerilim Değeri
250.0 V ac
Muhafaza Malzemesi
Naylon
Kontak Malzemesi
Bakır
Ürün Ayrıntıları
TE Connectivity MTA-100 IDC Closed End Receptacle Connectors
MTA-100 closed end MTA-100 IDC receptacle connectors for the mass termination of wires in a wide variety of applications. The connectors are pre-loaded with dual beam slotted IDC contacts which eliminate the need for wire stripping and enable one-step assembly. The contacts are also lubricated for protection against fretting corrosion. These MTA-100 IDC receptacle connectors are end to end stackable and have a friction lock mechanism to ensure a secure mating connection. The housings are incorporate moulded ribs to prevent reverse mating and versions are also available with polarizing tabs for extra alignment.
TE Connectivity MTA-100 2.54mm Interconnect System
MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
Standart
10
Teklif İsteyiniz
Standart
10
Teknik Belgeler
Özellikler
Marka
TE ConnectivityKontakların Sayısı
10
Sıraların Sayısı
1
Cinsiyet
Dişi
Hatve
2.54mm
Montaj Tipi
Kablo Montajı
Gövde Yönü
Dik Açı
Sonlandırma Yöntemi
IDC
Akım Değeri
5A
Kontak Kaplaması
Nikel üstüne Kalay
Seri
MTA-100
Minimum Çalışma Sıcaklığı
-55.0°C
Maksimum Çalışma Sıcaklığı
105.0°C
Gerilim Değeri
250.0 V ac
Muhafaza Malzemesi
Naylon
Kontak Malzemesi
Bakır
Ürün Ayrıntıları
TE Connectivity MTA-100 IDC Closed End Receptacle Connectors
MTA-100 closed end MTA-100 IDC receptacle connectors for the mass termination of wires in a wide variety of applications. The connectors are pre-loaded with dual beam slotted IDC contacts which eliminate the need for wire stripping and enable one-step assembly. The contacts are also lubricated for protection against fretting corrosion. These MTA-100 IDC receptacle connectors are end to end stackable and have a friction lock mechanism to ensure a secure mating connection. The housings are incorporate moulded ribs to prevent reverse mating and versions are also available with polarizing tabs for extra alignment.
TE Connectivity MTA-100 2.54mm Interconnect System
MTA-100 (Mass Termination Assembly) 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-100 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTA-100 IDC connectors can be quickly assembled to 28 AWG to 22 AWG discrete wire or notched ribbon cable. The MTA-100 connector system consists of female IDC connectors and PCB headers. The housings of the IDC connectors are colour coded according to wire size.