TE Connectivity DuraSeal Serisi İzoleli Faston Tip Kablo Ucu, Mavi, 1,5mm² - 2,5mm², 16AWG - 14AWG
Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Receptacle
Seri
DuraSeal
Minimum Wire Size mm²
1.5mm²
Cinsiyet
Dişi
Minimum Tel Boyutu (mm²)
1.5mm²
Maximum Wire Size mm²
2.5mm²
Maksimum Tel Boyutu (mm²)
2.5mm²
Tırnak Boyutu
6.35 x 0.8mm
Yalıtım
Yalıtımlı
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Maksimum Tel Boyutu (AWG)
14Amerikan Kablo Ölçüsü
Minimum Tel Boyutu (AWG)
16Amerikan Kablo Ölçüsü
Renk
Mavi
Sonlandırma Yöntemi
Sıkıştırma
Yalıtım Malzemesi
Naylon
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
50
Teklif İsteyiniz
50
Teknik Belgeler
Özellikler
Marka
TE ConnectivityTip
Receptacle
Seri
DuraSeal
Minimum Wire Size mm²
1.5mm²
Cinsiyet
Dişi
Minimum Tel Boyutu (mm²)
1.5mm²
Maximum Wire Size mm²
2.5mm²
Maksimum Tel Boyutu (mm²)
2.5mm²
Tırnak Boyutu
6.35 x 0.8mm
Yalıtım
Yalıtımlı
Minimum Wire Size AWG
16AWG
Maximum Wire Size AWG
14AWG
Maksimum Tel Boyutu (AWG)
14Amerikan Kablo Ölçüsü
Minimum Tel Boyutu (AWG)
16Amerikan Kablo Ölçüsü
Renk
Mavi
Sonlandırma Yöntemi
Sıkıştırma
Yalıtım Malzemesi
Naylon
Menşe
Mexico
Ürün Ayrıntıları
Receptacle
From TE Connectivity, Duraseal heat shrinkable crimp connectors. Non-coated crimp contacts for use with superseal PCB connectors are also included in this range (see stock number 680-2063.)
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed