Sene Sonu Yüklemeleri Hakkında!

2024 yılında yapacağımız son yükleme 16.12.2024 tarihinde yapılacaktır. Bu tarihten sonra yapacağınız alışverişler, 02.01.2025 tarihinde yapacağımız yüklememize dahil edilecektir.

Ayrıntılı bilgi için tıklayınız

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG

RS Stok Numarası: 465-659Marka: TE ConnectivityÜretici Parça Numarası: DR-6-50
brand-logo

Teknik Belgeler

Özellikler

Seri

Duraseal

Yalıtım

Yalıtımlı

Yalıtım Malzemesi

Naylon

İç Halka Çapı

5.3mm

Dış Halka Çapı

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Saplama Boyutu

M5

Renk

Mavi

Kontak Kaplaması

Kalay

Kontak Malzemesi

Bakır Alaşım

Kalınlık

2mm

Toplam Uzunluk

32mm

Menşe

Mexico

Ürün Ayrıntıları

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

İlginizi çekebilir

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

15,792 TL

Each (In a Pack of 50) (KDV Hariç)

18,95 TL

Each (In a Pack of 50) KDV Dahil

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG
sticker-359

15,792 TL

Each (In a Pack of 50) (KDV Hariç)

18,95 TL

Each (In a Pack of 50) KDV Dahil

TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal, M5 Stud Size, 1.5mm² to 2.5mm², 16AWG
Stok bilgileri geçici olarak kullanılamıyor.
sticker-359

Toptan Satın Al

MiktarBirim FiyatPer Paket
50 - 20015,792 TL789,60 TL
250 - 45014,523 TL726,15 TL
500 - 120014,241 TL712,05 TL
1250 - 245012,972 TL648,60 TL
2500+11,844 TL592,20 TL
İlginizi çekebilir

Teknik Belgeler

Özellikler

Seri

Duraseal

Yalıtım

Yalıtımlı

Yalıtım Malzemesi

Naylon

İç Halka Çapı

5.3mm

Dış Halka Çapı

10mm

Minimum Wire Size mm²

1.5mm²

Maximum Wire Size mm²

2.5mm²

Minimum Wire Size AWG

16AWG

Maximum Wire Size AWG

14AWG

Saplama Boyutu

M5

Renk

Mavi

Kontak Kaplaması

Kalay

Kontak Malzemesi

Bakır Alaşım

Kalınlık

2mm

Toplam Uzunluk

32mm

Menşe

Mexico

Ürün Ayrıntıları

TE Connectivity DuraSeal Ring Terminals

DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

İlginizi çekebilir