Teknik Belgeler
Özellikler
Montaj Stili
Flanş Montajı
Minimum Çalışma Sıcaklığı
-55°C
Yapı
Tel Sargı
Kasa Stili
Camlı Emaye
Sonlandırma Stili
Radyal
Direnç
220mΩ
Maksimum Çalışma Sıcaklığı
+450°C
Tolerans
±20%
Güç Değeri
100W
Çap
22mm
Dahili Boyutlar
193.802 x 119.38 x 48.26mm
Uzunluk
117mm
Seri
RSSD
Marka
VishayÇene Uzunluğu
71mm
Ürün Ayrıntıları
TE Connectivity Inverted SMT Through Board Connectors
Inverted SMT through board connectors designed to bring power to LED aluminium clad and FR4 boards from the underside of the PCB. The design of this connector eliminates wire dress management issues on the LED PCB. The connector is positioned on the PCB using a cutout or notch in the PCB. These inverted SMT lighting connectors have a low profile design and rounded corners to minimize shadowing. The top of the connector is flat to allow vacuum pick-up. Surface mount hold downs provide stability during mating and unmating. The housings of the connectors are made from high temperature thermoplastic allowing them to be used in reflow processing. These inverted SMT through board lighting connectors mate with the Mini CT connectors.
TE Connectivity SMT and Thru-Hole Poke-In Wire Lighting Connectors
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
2.650,00 TL
Each KDV Hariç
3.180,00 TL
Each KDV Dahil
1
2.650,00 TL
Each KDV Hariç
3.180,00 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Montaj Stili
Flanş Montajı
Minimum Çalışma Sıcaklığı
-55°C
Yapı
Tel Sargı
Kasa Stili
Camlı Emaye
Sonlandırma Stili
Radyal
Direnç
220mΩ
Maksimum Çalışma Sıcaklığı
+450°C
Tolerans
±20%
Güç Değeri
100W
Çap
22mm
Dahili Boyutlar
193.802 x 119.38 x 48.26mm
Uzunluk
117mm
Seri
RSSD
Marka
VishayÇene Uzunluğu
71mm
Ürün Ayrıntıları
TE Connectivity Inverted SMT Through Board Connectors
Inverted SMT through board connectors designed to bring power to LED aluminium clad and FR4 boards from the underside of the PCB. The design of this connector eliminates wire dress management issues on the LED PCB. The connector is positioned on the PCB using a cutout or notch in the PCB. These inverted SMT lighting connectors have a low profile design and rounded corners to minimize shadowing. The top of the connector is flat to allow vacuum pick-up. Surface mount hold downs provide stability during mating and unmating. The housings of the connectors are made from high temperature thermoplastic allowing them to be used in reflow processing. These inverted SMT through board lighting connectors mate with the Mini CT connectors.