3M Fiber Optik Konnektör, LC, Çoklu Mod, Çift Yönlü, 125μm, <0,2dB Giriş Kaybı, OM3, OM4
Teknik Belgeler
Özellikler
Marka
3MSeri
6600 LC
Konnektör Tipi
LC
Tek Mod/Çoklu Mod
Çoklu Mod
Tek Yönlü/Çift Yönlü
Çift Yönlü
Fiber Boyutu
125µm
Ekleme Kaybı
<0.2dB
Tampon Çapı
250/900µm
Optik Fiber Tipi
OM3, OM4
Renk
Kırmızı/Siyah
Maksimum Çalışma Sıcaklığı
+60°C
Minimum Çalışma Sıcaklığı
-10°C
Menşe
United States
Ürün Ayrıntıları
3M ST, SC and LC Hot Melt Fibre Optic Connectors
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
3MSeri
6600 LC
Konnektör Tipi
LC
Tek Mod/Çoklu Mod
Çoklu Mod
Tek Yönlü/Çift Yönlü
Çift Yönlü
Fiber Boyutu
125µm
Ekleme Kaybı
<0.2dB
Tampon Çapı
250/900µm
Optik Fiber Tipi
OM3, OM4
Renk
Kırmızı/Siyah
Maksimum Çalışma Sıcaklığı
+60°C
Minimum Çalışma Sıcaklığı
-10°C
Menşe
United States
Ürün Ayrıntıları
3M ST, SC and LC Hot Melt Fibre Optic Connectors
Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.
Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.
The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.