3M Fiber Optik Konnektör, ST, PC, Tekli Mod, 125μm, 0,2dB Giriş Kaybı

RS Stok Numarası: 237-7740Marka: 3MÜretici Parça Numarası: 8100
brand-logo
View all in Fiber Optik Konnektörler

Teknik Belgeler

Özellikler

Marka

3M

Konnektör Tipi

ST

Konnektör Cilası

PC

Tek Mod/Çoklu Mod

Tekli Mod

Fiber Boyutu

125µm

Ekleme Kaybı

0.2dB

Kılıf Çapı

3mm

Renk

Sarı

Maksimum Çalışma Sıcaklığı

+60°C

Minimum Çalışma Sıcaklığı

-10°C

Menşe

United States

Ürün Ayrıntıları

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

P.O.A.

3M Fiber Optik Konnektör, ST, PC, Tekli Mod, 125μm, 0,2dB Giriş Kaybı

1

Katlarında sipariş edilebilir 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
sticker-359

P.O.A.

3M Fiber Optik Konnektör, ST, PC, Tekli Mod, 125μm, 0,2dB Giriş Kaybı
Stok bilgileri geçici olarak kullanılamıyor.

1

Katlarında sipariş edilebilir 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
sticker-359

Teknik Belgeler

Özellikler

Marka

3M

Konnektör Tipi

ST

Konnektör Cilası

PC

Tek Mod/Çoklu Mod

Tekli Mod

Fiber Boyutu

125µm

Ekleme Kaybı

0.2dB

Kılıf Çapı

3mm

Renk

Sarı

Maksimum Çalışma Sıcaklığı

+60°C

Minimum Çalışma Sıcaklığı

-10°C

Menşe

United States

Ürün Ayrıntıları

3M ST, SC and LC Hot Melt Fibre Optic Connectors

Hot Melt ST, SC and LC fibre optic connectors have pre-loaded adhesive within pre-radiused PC zirconia ceramic ferrules, allowing faster installation than standard connectors that need adhesive preparation and injection. The adhesive of these Hot Melt ST and SC fibre optic connectors is resettable, allowing greater scope for adjustments during assembly.

Hot Melt ST and SC fibre optic connectors only require one stage of polishing using a polishing puck for both connector types (stock number 267-8122) and one grade of polishing film (stock number 267-8144). A polishing pad is also available (see stock number 267-8138) and a SC Hot Melt connector cooling stand (stock number 267-8087) for retaining assembled SC Hot Melt connectors immediately after curing. These Hot Melt fibre optic connectors accept multi-mode 125 micron fibre cables with sheath diameters to 3mm and, once installed, provide a low loss, mechanically stable assembly.

The SC Hot Melt connector requires a crimp tool stock no. 267-8100 to terminate the body via a crimp ring to cable.