4D Systems SK-32PTU-AR TFT LCD Renkli Ekran / Dokunmatik Ekran, 3,2inç, VGA, 240 x 320piksel
Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
3.2inç
Ekran Teknolojisi
Dirençli Dokunmatik Ekran
Ekran Çözünürlüğü
240 x 320pixel
Viewing Area Dimensions
48.6 x 64.8mm
Boyutlar
54.3 x 77.7 x 17mm
Şununla Birlikte Kullanım İçin
Arduino
Seri
gen4
Menşe
Philippines
Ürün Ayrıntıları
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems LCD Touchscreens
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
3.2inç
Ekran Teknolojisi
Dirençli Dokunmatik Ekran
Ekran Çözünürlüğü
240 x 320pixel
Viewing Area Dimensions
48.6 x 64.8mm
Boyutlar
54.3 x 77.7 x 17mm
Şununla Birlikte Kullanım İçin
Arduino
Seri
gen4
Menşe
Philippines
Ürün Ayrıntıları
4D Systems Resistive Touch LCD Starter Kits with PICASO Processor for Use with Arduino
The range of resistive touch LCD Starter kits for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the resistive touch LCD module, eliminating wiring hassles. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module can be programmed and configured using 4D Systems Workshop4 software IDE (see datasheet for link to download). The LCD module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.