Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
3.2inç
Arabirim Tipi
I2C, TTL
Çözünürlük
240 x 320piksel
Dokunmatik Ekran
Yes
Görüntüleme Alanı Boyutları
49 x 65mm
Besleme Gerilimi
5,5 V
Dokunmatik Ekran Tipi
Dirençli
Arka Işık Tipi
LED
Ekran Modu
Aktarıcı
AC veya DC Giriş Gerilimi
dc
Boyutlar
76.69 x 56.32 x 15.9mm
Ekran Matrisi Teknolojisi
TFT
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
+60°C
Grafik Dizisi Tipi
VGA
Parlaklık
200cd/m²
Akım Değeri
215mA
Yanıt Süresi
25ms
Yükseklik
79.65mm
Karşılanan Standartlar
CE, RoHS Uyumlu
Derinlik
15.9mm
Görüntüleme Alanı Genişliği
48.6mm
Çalışma Sıcaklığı Aralığı
-10 → +60°C
Görüntüleme Alanı Yüksekliği
64.8mm
Kontrast Oranı
350:1
Renklerin Sayısı
65,536
Genişlik
56.32mm
Ürün Ayrıntıları
Resistive Touch LCD Modules with PICASO Processor, 4D Systems
4D Systems range of resistive touch modules with PICASO processor are available in three sizes: 2.4 inch, 2.8 inch and 3.2 inch. The on-board PICASO graphics controller is driven by Extensible Virtual Engine (EVE) and benefits from built-in features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits:
2.4 inch LCD Module — 9028640
•Dimensions: 45 mm x 63 mm x 16 mm
•Viewing area: 36.72 mm x 48.96 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
2.8 inch LCD Module — 9028644
•Dimensions: 52.1 mm x 72 mm x 16 mm
•Viewing area: 43.2 mm x 57.6 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
3.2 inch LCD Module — 9028653
•Dimensions: 56.3 mm x 80.5 mm x 15.9 mm
•Viewing area: 48.60 x 64.80 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
4D Systems LCD Touchscreens
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
3.2inç
Arabirim Tipi
I2C, TTL
Çözünürlük
240 x 320piksel
Dokunmatik Ekran
Yes
Görüntüleme Alanı Boyutları
49 x 65mm
Besleme Gerilimi
5,5 V
Dokunmatik Ekran Tipi
Dirençli
Arka Işık Tipi
LED
Ekran Modu
Aktarıcı
AC veya DC Giriş Gerilimi
dc
Boyutlar
76.69 x 56.32 x 15.9mm
Ekran Matrisi Teknolojisi
TFT
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
+60°C
Grafik Dizisi Tipi
VGA
Parlaklık
200cd/m²
Akım Değeri
215mA
Yanıt Süresi
25ms
Yükseklik
79.65mm
Karşılanan Standartlar
CE, RoHS Uyumlu
Derinlik
15.9mm
Görüntüleme Alanı Genişliği
48.6mm
Çalışma Sıcaklığı Aralığı
-10 → +60°C
Görüntüleme Alanı Yüksekliği
64.8mm
Kontrast Oranı
350:1
Renklerin Sayısı
65,536
Genişlik
56.32mm
Ürün Ayrıntıları
Resistive Touch LCD Modules with PICASO Processor, 4D Systems
4D Systems range of resistive touch modules with PICASO processor are available in three sizes: 2.4 inch, 2.8 inch and 3.2 inch. The on-board PICASO graphics controller is driven by Extensible Virtual Engine (EVE) and benefits from built-in features such as full colour image, animation, icon and video display. You also have access to Workshop4 IDE for software development and coding using the 4DGL graphics language.
Features & Benefits:
2.4 inch LCD Module — 9028640
•Dimensions: 45 mm x 63 mm x 16 mm
•Viewing area: 36.72 mm x 48.96 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
2.8 inch LCD Module — 9028644
•Dimensions: 52.1 mm x 72 mm x 16 mm
•Viewing area: 43.2 mm x 57.6 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting
3.2 inch LCD Module — 9028653
•Dimensions: 56.3 mm x 80.5 mm x 15.9 mm
•Viewing area: 48.60 x 64.80 mm
•240 x 320 pixel resolution
•13 GPIO pins
•Up to 65k colours
•4-Wire resistive touch panel
•14 KB flash memory
•14 KB SRAM
•2 asynchronous hardware serial ports
•I2C serial interface
•8 x 16-bit timers
•microSD memory card socket
•FAT16 DOS compatible file access
•Lithium polymer battery support
•PWM audio pin
•Audio amplifier
•30-pin header for I/O expansion and daughter board plug-in
•Suitable for a 4 V to 5.5 V power supply
•4 corner plates with 2.7 mm holes for mounting