4D Systems 1,7inç Pasif Matris OLED Display (Gösterge), 160 x 128, COM Arayüz (Haberleşme)
Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
1.7inç
Ekran Teknolojisi
OLED Ekran
Ekran Çözünürlüğü
160 x 128pixel
Viewing Area Dimensions
33.6 x 27.0mm
Boyutlar
52.0 x 36.0 x 15.5mm
Şununla Birlikte Kullanım İçin
Arduino
Ürün Ayrıntıları
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems Passive Matrix OLED Displays
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
25
Teklif İsteyiniz
25
Teknik Belgeler
Özellikler
Marka
4D SystemsÇapraz Ekran Boyutu
1.7inç
Ekran Teknolojisi
OLED Ekran
Ekran Çözünürlüğü
160 x 128pixel
Viewing Area Dimensions
33.6 x 27.0mm
Boyutlar
52.0 x 36.0 x 15.5mm
Şununla Birlikte Kullanım İçin
Arduino
Ürün Ayrıntıları
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.