4D Systems 0.96 in Arduino Compatible Display with OLED Display
Teknik Belgeler
Özellikler
Marka
4D SystemsDiagonal Display Size
0.96in
Ürün Tipi
Arduino Compatible Display
Display Technology
OLED Display
Ekran Çözünürlüğü
96 x 64 pixel
External Dimensions
32.7 x 26.7 x 13.2 mm
Görüntüleme Alanı Boyutları
20.1 x 13.4 mm
Şununla Birlikte Kullanım İçin
Arduino
Arabirim Tipi
GPIO, SPI
Standartlar/Onaylar
No
Menşe
Philippines
Ürün Ayrıntıları
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.
4D Systems Passive Matrix OLED Displays
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
4D SystemsDiagonal Display Size
0.96in
Ürün Tipi
Arduino Compatible Display
Display Technology
OLED Display
Ekran Çözünürlüğü
96 x 64 pixel
External Dimensions
32.7 x 26.7 x 13.2 mm
Görüntüleme Alanı Boyutları
20.1 x 13.4 mm
Şununla Birlikte Kullanım İçin
Arduino
Arabirim Tipi
GPIO, SPI
Standartlar/Onaylar
No
Menşe
Philippines
Ürün Ayrıntıları
4D Systems PMOLED Display Modules with GOLDELOX Processor for Use with Arduino
The range of passive matrix OLED display modules for Arduino available from 4D Systems provide everything needed by a user to easily interface between an Arduino (using its serial port + one GPIO pin) and the OLED module, eliminating wiring headaches. The user can then quickly begin programming the 4D Systems display module through the Arduino. This display is a secondary display and does not replace the monitor or TV used to program the Arduino itself.
Powered from the Arduino the display module GOLDELOX processor can be programmed and configured using 4D Systems’ Workshop4 IDE software (see datasheet for download instruction). The OLED module is set up to receive a wide range of serial commands from the Arduino, for example, to display shapes, text, images, to play sounds and log data to the microSD card.