ABB EPD24 Elektronik Devre Kesici, 12 A, Raya Monte, 24V

RS Stok Numarası: 914-4626Marka: ABBÜretici Parça Numarası: 2CDE601101R2012 EPD24-TB-101-12A
brand-logo

Teknik Belgeler

Özellikler

Marka

ABB

Seri

EPD24

Akım Değeri

12A

Nominal DC Gerilimi

24V

Montaj Stili

DIN Rayına Monte

Menşe

Germany

Ürün Ayrıntıları

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

Teklif İsteyiniz

ABB EPD24 Elektronik Devre Kesici, 12 A, Raya Monte, 24V

Teklif İsteyiniz

ABB EPD24 Elektronik Devre Kesici, 12 A, Raya Monte, 24V
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Marka

ABB

Seri

EPD24

Akım Değeri

12A

Nominal DC Gerilimi

24V

Montaj Stili

DIN Rayına Monte

Menşe

Germany

Ürün Ayrıntıları

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.