ABB EPD24 Elektronik Devre Kesici, 500 mA, Raya Monte, 24V

RS Stok Numarası: 914-4590Marka: ABBÜretici Parça Numarası: 2CDE601101R2905
brand-logo
View all in Elektronik Devre Kesiciler

Teknik Belgeler

Özellikler

Marka

ABB

Seri

EPD24

Akım Değeri

0.5A

Nominal DC Gerilimi

24V

Montaj Stili

DIN Rayına Monte

Menşe

Germany

Ürün Ayrıntıları

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

7.697,14 TL

Each KDV Hariç

9.236,57 TL

Each KDV Dahil

ABB EPD24 Elektronik Devre Kesici, 500 mA, Raya Monte, 24V

7.697,14 TL

Each KDV Hariç

9.236,57 TL

Each KDV Dahil

ABB EPD24 Elektronik Devre Kesici, 500 mA, Raya Monte, 24V
Stok bilgileri geçici olarak kullanılamıyor.

Toptan Satın Al

MiktarBirim Fiyat
1 - 47.697,14 TL
5 - 97.313,28 TL
10 - 246.927,96 TL
25 - 496.544,59 TL
50+6.160,24 TL

Teknik Belgeler

Özellikler

Marka

ABB

Seri

EPD24

Akım Değeri

0.5A

Nominal DC Gerilimi

24V

Montaj Stili

DIN Rayına Monte

Menşe

Germany

Ürün Ayrıntıları

EPD24 Series Electronic Protection Device

ABB EPD24 series electronic protection devices offer overcurrent protection for 24 V dc load circuits. This protection is achieved by a combination of active electronic current limitations. In the case of a short circuit and an overload, deactivation from 1.1 x Input occurs.
If a fault occurs in a load circuit, the EPD24 protection device will detect this rapidly and reliably, disable the power output transistor, interrupting the current flow in the defective circuit. The maximum possible overcurrent is always limited to 1.3…1.8 times the selected rated current. An activation of capacitive loads up to 20,000 μF is possible, deactivation only occurring in the case of overloads or short circuits.