Adafruit 2305 Controller Board, Kontrol Kartı, DRV2605L İçin, Haptic Motorlar İle Kullanım
Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESŞununla Birlikte Kullanım İçin
Dokunsal Motor
Kit Sınıflandırması
Geliştirme Panosu
Öne Çıkan Cihaz
DRV2605L
Kit Adı
Controller Board
Ürün Ayrıntıları
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Motor Controllers & Drivers
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
358,56 TL
Each KDV Hariç
430,27 TL
Each KDV Dahil
1
358,56 TL
Each KDV Hariç
430,27 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 358,56 TL |
| 5 - 9 | 320,55 TL |
| 10+ | 286,66 TL |
Teknik Belgeler
Özellikler
Marka
ADAFRUIT INDUSTRIESŞununla Birlikte Kullanım İçin
Dokunsal Motor
Kit Sınıflandırması
Geliştirme Panosu
Öne Çıkan Cihaz
DRV2605L
Kit Adı
Controller Board
Ürün Ayrıntıları
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.