Laboratuvar Tipi Güç Kaynağı Aim-TTi MX180TP, 3 Çıkışlı, Dijital, Çıkış Gücü: 378W, RS Kalibrasyonlu
Teknik Belgeler
Özellikler
Marka
Aim-TTiSeri
MX
Model Numarası
MX180TP
Çıkışların Sayısı
3
Kalibre Edilmiş
RSCAL
Besleme Gerilimi
110 → 240V ac
Çıkış Gerilimi
0 → 12 V, 0 → 120 V, 0 → 60V
Çıkış Akımı
0 → 1.5 A, 2 x 0 → 3A
Güç Değeri
378W
Ekranların Sayısı
3
Laboratuvar Güç Kaynağı Tipi
Üçlü Çıkışlı DC Güç Kaynağı
Tip
Dijital
Dijital/Analog
Dijital
Çıkış Konnektörü
Bağlayıcı Terminali
Giriş Konnektörü
IEC 320
Maksimum Sıcaklık
+40°C
Minimum Sıcaklık
+5°C
Menşe
United Kingdom
Ürün Ayrıntıları
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
63.005,36 TL
Each KDV Hariç
75.606,43 TL
Each KDV Dahil
1
63.005,36 TL
Each KDV Hariç
75.606,43 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
Aim-TTiSeri
MX
Model Numarası
MX180TP
Çıkışların Sayısı
3
Kalibre Edilmiş
RSCAL
Besleme Gerilimi
110 → 240V ac
Çıkış Gerilimi
0 → 12 V, 0 → 120 V, 0 → 60V
Çıkış Akımı
0 → 1.5 A, 2 x 0 → 3A
Güç Değeri
378W
Ekranların Sayısı
3
Laboratuvar Güç Kaynağı Tipi
Üçlü Çıkışlı DC Güç Kaynağı
Tip
Dijital
Dijital/Analog
Dijital
Çıkış Konnektörü
Bağlayıcı Terminali
Giriş Konnektörü
IEC 320
Maksimum Sıcaklık
+40°C
Minimum Sıcaklık
+5°C
Menşe
United Kingdom
Ürün Ayrıntıları
Aim-TTi MX180T & MX180TP Triple Output Power Supplies
The MX180T ( 895-2491 ) has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A. Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch. The MX180TP ( 895-2495 ) incorporates USB, RS232 and LXI compliant LAN interfaces. These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.
The Aim-TTi MX series provides impressive power density by combining high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response. To increase its ability to match a variety of applications, each output has more than one range. Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A. When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.
For an optional GPIB module see stock number 144-5481.