Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Yüzeye Monte
Manyetik Tipi
Tek Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3,8 V
Paket Tipi
SOT-23
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Hall Effect Sensors, Allegro MicroSystems
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
49,278 TL
Each (In a Pack of 5) KDV Hariç
59,134 TL
Each (In a Pack of 5) KDV Dahil
5
49,278 TL
Each (In a Pack of 5) KDV Hariç
59,134 TL
Each (In a Pack of 5) KDV Dahil
5
Toptan Satın Al
Miktar | Birim Fiyat | Per Paket |
---|---|---|
5 - 20 | 49,278 TL | 246,39 TL |
25 - 95 | 33,798 TL | 168,99 TL |
100 - 245 | 29,154 TL | 145,77 TL |
250 - 495 | 28,466 TL | 142,33 TL |
500+ | 27,778 TL | 138,89 TL |
Teknik Belgeler
Özellikler
Marka
Allegro MicrosystemsSensör Tipi
Hall Etkisi Sensörleri
Montaj Tipi
Yüzeye Monte
Manyetik Tipi
Tek Kutuplu
Maksimum Çalışma Besleme Gerilimi
24 V
Minimum Çalışma Besleme Gerilimi
3,8 V
Paket Tipi
SOT-23
Pim Sayısı
3
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Ürün Ayrıntıları
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.