Altera PL-ETH2-BLASTER Programlama Kablosu

RS Stok Numarası: 906-3937Marka: AlteraÜretici Parça Numarası: PL-ETH2-BLASTER
brand-logo

Teknik Belgeler

Özellikler

Marka

Altera

Kit Sınıflandırması

Programlayıcı

Kit Adı

Ethernet Blaster II

Ürün Tipi

Programlayıcı

Ürün Ayrıntıları

EthernetBlaster II In-Circuit Programming Cable, Altera

The Altera EthernetBlaster II connects to a standard Ethernet network port with an RJ-45 connector to communicate with client systems. Multiple developers can access Altera devices simultaneously and download design changes directly to the device, increasing productivity and enabling multiple design iterations in quick succession.

Communicate with client systems using the TCP/IP protocol. Supports both static and dynamic IP addressing. You can also interface directly using a standard CAT 5 UTP 4-pair patch cable.

You can also programme serial configuration devices, including EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices. In addition, the EthernetBlaster II communications cable supports target systems using 3.3-V LVTTL/LVCMOS and single-ended I/O standards from 3.3 V down to 1.2 V.

Supported Devices

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

24.015,59 TL

Each KDV Hariç

28.818,71 TL

Each KDV Dahil

Altera PL-ETH2-BLASTER Programlama Kablosu

24.015,59 TL

Each KDV Hariç

28.818,71 TL

Each KDV Dahil

Altera PL-ETH2-BLASTER Programlama Kablosu
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Marka

Altera

Kit Sınıflandırması

Programlayıcı

Kit Adı

Ethernet Blaster II

Ürün Tipi

Programlayıcı

Ürün Ayrıntıları

EthernetBlaster II In-Circuit Programming Cable, Altera

The Altera EthernetBlaster II connects to a standard Ethernet network port with an RJ-45 connector to communicate with client systems. Multiple developers can access Altera devices simultaneously and download design changes directly to the device, increasing productivity and enabling multiple design iterations in quick succession.

Communicate with client systems using the TCP/IP protocol. Supports both static and dynamic IP addressing. You can also interface directly using a standard CAT 5 UTP 4-pair patch cable.

You can also programme serial configuration devices, including EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices. In addition, the EthernetBlaster II communications cable supports target systems using 3.3-V LVTTL/LVCMOS and single-ended I/O standards from 3.3 V down to 1.2 V.

Supported Devices