Teknik Belgeler
Özellikler
Marka
Arcol OhmiteDirenç
10mΩ
Güç Değeri
5W
Tolerans
±1%
Seri
15
Maksimum Çalışma Sıcaklığı
+275°C
Minimum Çalışma Sıcaklığı
-55°C
Menşe
Mexico
Ürün Ayrıntıları
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.
Current Sense - Axial Through Hole
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
114,68 TL
Each (In a Bag of 5) KDV Hariç
137,616 TL
Each (In a Bag of 5) KDV Dahil
5
114,68 TL
Each (In a Bag of 5) KDV Hariç
137,616 TL
Each (In a Bag of 5) KDV Dahil
5
Toptan Satın Al
Miktar | Birim Fiyat | Per Bag |
---|---|---|
5 - 20 | 114,68 TL | 573,40 TL |
25 - 95 | 95,974 TL | 479,87 TL |
100 - 245 | 75,388 TL | 376,94 TL |
250 - 495 | 65,612 TL | 328,06 TL |
500+ | 61,476 TL | 307,38 TL |
Teknik Belgeler
Özellikler
Marka
Arcol OhmiteDirenç
10mΩ
Güç Değeri
5W
Tolerans
±1%
Seri
15
Maksimum Çalışma Sıcaklığı
+275°C
Minimum Çalışma Sıcaklığı
-55°C
Menşe
Mexico
Ürün Ayrıntıları
Ohmite 10 Series Current Sense Resistors
Ohmite 10 Series are current sense axial resistors. Two versions of the 10 series axial resistors are available, with either two terminals or four terminals.
The four termination variation is designed for use in a Kelvin configuration. This configuration allows a current to be applied through two opposite terminals while the sensing voltage is measure across the other two terminals. The temperature coefficient of the terminals and the resistance is practically eliminated by the Kelvin configuration. The use of four terminals enables a lower self-heating drift and lower temperature coefficient of resistance than traditional two terminal axial resistors.