Civalı Eğim Sensörü (Mercury Tilt Switch) 15°, 120V, 250 mA
Teknik Belgeler
Özellikler
Marka
AssemtechDiferansiyel Açısı
15Derece
Maksimum Akım
250mA
Maksimum AC Gerilim
120V
Maksimum DC Gerilim
24V
Kontak Direnci
10Ω
Terminal Tipi
Kurşun Tel
Uzunluk
22.1mm
Minimum Çalışma Sıcaklığı
-37°C
Maksimum Çalışma Sıcaklığı
+100°C
Boyutlar
22.1 x 5.6mm
Menşe
United States
Ürün Ayrıntıları
Miniature Tilt Switches
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
AssemtechDiferansiyel Açısı
15Derece
Maksimum Akım
250mA
Maksimum AC Gerilim
120V
Maksimum DC Gerilim
24V
Kontak Direnci
10Ω
Terminal Tipi
Kurşun Tel
Uzunluk
22.1mm
Minimum Çalışma Sıcaklığı
-37°C
Maksimum Çalışma Sıcaklığı
+100°C
Boyutlar
22.1 x 5.6mm
Menşe
United States
Ürün Ayrıntıları
Miniature Tilt Switches
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts