Civalı Eğim Sensörü (Mercury Tilt Switch) 15°, 240V, 10 A
Teknik Belgeler
Özellikler
Marka
AssemtechDiferansiyel Açısı
15 °
Maksimum Akım
10 A
Maksimum AC Gerilim
240V
Terminal Tipi
Kurşun Tel
Kontak Direnci
300mΩ
Çap
13 mm
Uzunluk
196.5mm
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+70°C
Boyutlar
196.5 x 13 mm
Menşe
United Kingdom
Ürün Ayrıntıları
Tilt Switch with Mounting Clip
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
AssemtechDiferansiyel Açısı
15 °
Maksimum Akım
10 A
Maksimum AC Gerilim
240V
Terminal Tipi
Kurşun Tel
Kontak Direnci
300mΩ
Çap
13 mm
Uzunluk
196.5mm
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+70°C
Boyutlar
196.5 x 13 mm
Menşe
United Kingdom
Ürün Ayrıntıları
Tilt Switch with Mounting Clip
Warning
Mercury is a toxic substance. Do not cut open or incinerate these devices. Dispose of safely in accordance with prescribed practice and local regulations.
Mercury Tilt, Vibration & Movement
Glass and metal bodied versions offer bounce-free switching and quick break action even when tilted slowly. Contacts make and break with vibration motion and return to the open state at rest. Unless otherwise stated, the angle by which the switch must be tilted to ensure contact operation (operating angle), must be approximately 1.5 to 2 times the stated differential angle. The differential angle is the measure from the “just closed” position to the “just open” position. Inert gas and hermetic sealing protects contacts