Bartec ComEx Serisi Ø 30,5mm Buton (Sadece Kafa Parçası)

RS Stok Numarası: 244-3421Marka: BartecÜretici Parça Numarası: 05-0003-000800
brand-logo
View all in Acil Stop Butonları

Teknik Belgeler

Özellikler

Marka

Bartec

Kesici Çapı

30mm

Seri

ComEx

Basmalı Düğme Çapı

30mm

Tehlikeli Alan Sertifikası

ATEX

Basmalı Düğme Malzemesi

Termoplastik

Menşe

Germany

Ürün Ayrıntıları

Switch Actuators

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

2.001,74 TL

Each KDV Hariç

2.402,09 TL

Each KDV Dahil

Bartec ComEx Serisi Ø 30,5mm Buton (Sadece Kafa Parçası)
sticker-359

2.001,74 TL

Each KDV Hariç

2.402,09 TL

Each KDV Dahil

Bartec ComEx Serisi Ø 30,5mm Buton (Sadece Kafa Parçası)
Stok bilgileri geçici olarak kullanılamıyor.
sticker-359

Toptan Satın Al

MiktarBirim Fiyat
1 - 42.001,74 TL
5 - 91.939,82 TL
10+1.838,34 TL

Teknik Belgeler

Özellikler

Marka

Bartec

Kesici Çapı

30mm

Seri

ComEx

Basmalı Düğme Çapı

30mm

Tehlikeli Alan Sertifikası

ATEX

Basmalı Düğme Malzemesi

Termoplastik

Menşe

Germany

Ürün Ayrıntıları

Switch Actuators

Hazardous Area Actuators & Contact Blocks

Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.