Bartec ComEx Series Illuminated Push Button, Panel Mount, 30.5mm Cutout, SPST, IP67
Teknik Belgeler
Özellikler
Marka
BartecAydınlatmalı
Yes
Panel Oyuğu Çapı
30.5mm
Montaj Tipi
Panel Montajı
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
IP Değeri
IP67
Seri
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Tipi
Kurşun Tel
Maksimum AC Gerilim
230V
Maksimum DC Gerilim
24V
Minimum Çalışma Sıcaklığı
-40°C
Tehlikeli Alan Sertifikası
ATEX
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
Germany
Ürün Ayrıntıları
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
BartecAydınlatmalı
Yes
Panel Oyuğu Çapı
30.5mm
Montaj Tipi
Panel Montajı
Kontak Yapılandırması
Tek Kutuplu Tek Atımlı (SPST)
IP Değeri
IP67
Seri
ComEx
Manufacturer Part No.
07-3363-3823/2000
Terminal Tipi
Kurşun Tel
Maksimum AC Gerilim
230V
Maksimum DC Gerilim
24V
Minimum Çalışma Sıcaklığı
-40°C
Tehlikeli Alan Sertifikası
ATEX
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
Germany
Ürün Ayrıntıları
Illuminated Mounting Pushbutton
Illuminated pushbuttons in a range of colours, either N/O or N/C, for floor mounting on TS 35 x 7.5 DIN rail.
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.