Chauvin Arnoux DTR 8510 Tesisat Test Cihazı
Teknik Belgeler
Özellikler
Marka
Chauvin ArnouxRatio Range CT
0.8000 → 1000.0
Ratio Range (CT)
0.8000 → 1000.0
Ratio Range VT/PT
0.8000 → 8000.0 :1
Ratio Range (VT/PT)
0.8000 → 8000.0 :1
Excitation Voltage VT/PT
32Vrms
Excitation Voltage (VT/PT)
32Vrms
Excitation Signal CT
0 → 1 A, 0.1 → 4.5Vrms
Excitation Signal (CT)
0 → 1 A, 0.1 → 4.5Vrms
Test Frekansları
70Hz
Excitation Current Display
0 → 1A
Test Results Storage
10 000
Pil Ömrü
10 sa
Güç Kaynağı
Batarya
Uzunluk
272mm
Model Numarası (p)
DTR 8510
Minimum Çalışma Sıcaklığı
-10°C
IP Değeri
IP40, IP53
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
United States
Ürün Ayrıntıları
DTR 8510 Digital Transformer Ratiometer
The DTR 8510 Dogital Transformer Ratiometer is fully automatic and uses the IEEE C57.12-90™-2006 test method. The DTR 8510 is a portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers.When connected to a non-energized transformer, the DTR 8510 accurately measures the primary-to-secondary turns ratio, while simultaneouslydisplaying the polarity and excitation current.
Supplied with
DataViewⓇ analysis software
Standards
EN 61010-1, 50V CAT IV, Pollution Degree 2
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Chauvin ArnouxRatio Range CT
0.8000 → 1000.0
Ratio Range (CT)
0.8000 → 1000.0
Ratio Range VT/PT
0.8000 → 8000.0 :1
Ratio Range (VT/PT)
0.8000 → 8000.0 :1
Excitation Voltage VT/PT
32Vrms
Excitation Voltage (VT/PT)
32Vrms
Excitation Signal CT
0 → 1 A, 0.1 → 4.5Vrms
Excitation Signal (CT)
0 → 1 A, 0.1 → 4.5Vrms
Test Frekansları
70Hz
Excitation Current Display
0 → 1A
Test Results Storage
10 000
Pil Ömrü
10 sa
Güç Kaynağı
Batarya
Uzunluk
272mm
Model Numarası (p)
DTR 8510
Minimum Çalışma Sıcaklığı
-10°C
IP Değeri
IP40, IP53
Maksimum Çalışma Sıcaklığı
+50°C
Menşe
United States
Ürün Ayrıntıları
DTR 8510 Digital Transformer Ratiometer
The DTR 8510 Dogital Transformer Ratiometer is fully automatic and uses the IEEE C57.12-90™-2006 test method. The DTR 8510 is a portable digital transformer ratiometer designed for on-site testing of power, potential and current transformers.When connected to a non-energized transformer, the DTR 8510 accurately measures the primary-to-secondary turns ratio, while simultaneouslydisplaying the polarity and excitation current.
Supplied with
DataViewⓇ analysis software
Standards
EN 61010-1, 50V CAT IV, Pollution Degree 2