Dehn Taban Elemanı, BXT Serisi
Teknik Belgeler
Özellikler
Marka
DehnBastırıcı Tipi
Taban Elemanı
Montaj Tipi
DIN Rayı
Seri
BXT
Uzunluk
50mm
Derinlik
12mm
Yükseklik
90mm
Boyutlar
50 x 12 x 90mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
DEHN Data Signal Surge Arresters
DEHN data signal surge arresters for industrial process control circuits, the protection of the low voltage power supply and the I/O of PLC applications using sensors and transducers.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
2.905,26 TL
Each (KDV Hariç)
3.486,31 TL
Each KDV Dahil
1
2.905,26 TL
Each (KDV Hariç)
3.486,31 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 2.905,26 TL |
| 5 - 9 | 2.789,17 TL |
| 10 - 24 | 2.644,41 TL |
| 25+ | 2.412,23 TL |
Teknik Belgeler
Özellikler
Marka
DehnBastırıcı Tipi
Taban Elemanı
Montaj Tipi
DIN Rayı
Seri
BXT
Uzunluk
50mm
Derinlik
12mm
Yükseklik
90mm
Boyutlar
50 x 12 x 90mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
DEHN Data Signal Surge Arresters
DEHN data signal surge arresters for industrial process control circuits, the protection of the low voltage power supply and the I/O of PLC applications using sensors and transducers.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.