Dehn Tip 2 Arestör, 500 V, 20kA, DG Serisi
Teknik Belgeler
Özellikler
Marka
DehnBastırıcı Tipi
Tip 2 Durdurucu
Maksimum Gerilim Değeri
500 V
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
20kA
Seri
DG
Uzunluk
18mm
Derinlik
66mm
Yükseklik
90mm
Boyutlar
18 x 66 x 90mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
DEHNguard Modular Surge Arresters Type 2
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
3.581,28 TL
3.581,28 TL Each (KDV Hariç)
4.297,54 TL
4.297,54 TL Each KDV Dahil
1
3.581,28 TL
3.581,28 TL Each (KDV Hariç)
4.297,54 TL
4.297,54 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 3.581,28 TL |
| 5 - 9 | 3.439,26 TL |
| 10 - 24 | 3.262,14 TL |
| 25+ | 2.977,56 TL |
Teknik Belgeler
Özellikler
Marka
DehnBastırıcı Tipi
Tip 2 Durdurucu
Maksimum Gerilim Değeri
500 V
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
20kA
Seri
DG
Uzunluk
18mm
Derinlik
66mm
Yükseklik
90mm
Boyutlar
18 x 66 x 90mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
DEHNguard Modular Surge Arresters Type 2
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.