Teknik Belgeler
Özellikler
Yazdırma Rengi
Siyah
Laminasyonlu
No
Etiket Miktarı
1 Roll
Model Number p
8091678
Model Numarası (p)
C.A 6541
Bant Uzunluğu
5.5 m
Bant Genişliği
19 mm
Arka Plan Rengi
Beyaz
Çalıştığı Yazıcı Modelleri
Rhino 4200, Rhino 5200, Rhino 6000
Marka
DymoMenşe
Belgium
Ürün Ayrıntıları
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.787,26 TL
Each KDV Hariç
2.144,71 TL
Each KDV Dahil
1
1.787,26 TL
Each KDV Hariç
2.144,71 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 2 | 1.787,26 TL |
3 - 5 | 1.715,86 TL |
6 - 10 | 1.680,95 TL |
11+ | 1.610,08 TL |
Teknik Belgeler
Özellikler
Yazdırma Rengi
Siyah
Laminasyonlu
No
Etiket Miktarı
1 Roll
Model Number p
8091678
Model Numarası (p)
C.A 6541
Bant Uzunluğu
5.5 m
Bant Genişliği
19 mm
Arka Plan Rengi
Beyaz
Çalıştığı Yazıcı Modelleri
Rhino 4200, Rhino 5200, Rhino 6000
Marka
DymoMenşe
Belgium
Ürün Ayrıntıları
T-1 (5mm) & T-1 (6mm) Tubular LES
Screw (LES, MES, SES)
Filament lamps will perform to specification and give optimum life when: they are powered at the rated voltage from a stabilised 50Hz ac supply; the ambient temperature is in the range +20°C to +25°C; and where no mechanical vibration is present.
Deviations from these criteria can have a significant effect on lamp life, particularly with low current filaments (<80mA).
Operation from a DC supply at rated voltage can reduce specified life by up to 50%. The effect of variation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Current consumption can vary by up to ±10% on stated values at rated supply voltage. Care should therefore be exercised when running a number of lamps in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
Conversion of light output units: Lumens = MSCP x 12.6, MSCP = Lumens / 12.6.