EA Elektro-Automatik EL 9000 Serisi Elektronik Yük, 0 → 40 Ω
Teknik Belgeler
Özellikler
Marka
EA Elektro-AutomatikSeri
EL 9000
Yük Tipi
Programmable
Sabit Gerilim Modu Aralığı
0 → 750 V
Sabit Akım Modu Aralığı
0 → 25 A
Sabit Direnç Modu Aralığı
0 → 40 Ω
Sabit Vat Miktarı Modu Aralığı
0 → 2400 W
Raf Üniteleri
2 U
Menşe
Germany
Ürün Ayrıntıları
EA-EL 9000 Series
The microprocessor controlled loads of the series EA-EL 9000 (2400W - 7200W) accomplish most requirements in modern load concepts for industrial and R&D areas. Four common regulation modes - constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR) - can be used in combination with any of three operation modes (A, B and A/B). In static operation the two values A and B can be set using a fine adjustment encoder. The user can switch between these two values, or an external source can be used via the trigger input. In dynamic operation the microcontroller switches between A and B according to programmed time and interval. For each value a pulse interval between 50μs and 100s can be set. In addition, a ramp up and down of between 30μs and 200ms can be set.
Elektro-Automatik
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
EA Elektro-AutomatikSeri
EL 9000
Yük Tipi
Programmable
Sabit Gerilim Modu Aralığı
0 → 750 V
Sabit Akım Modu Aralığı
0 → 25 A
Sabit Direnç Modu Aralığı
0 → 40 Ω
Sabit Vat Miktarı Modu Aralığı
0 → 2400 W
Raf Üniteleri
2 U
Menşe
Germany
Ürün Ayrıntıları
EA-EL 9000 Series
The microprocessor controlled loads of the series EA-EL 9000 (2400W - 7200W) accomplish most requirements in modern load concepts for industrial and R&D areas. Four common regulation modes - constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR) - can be used in combination with any of three operation modes (A, B and A/B). In static operation the two values A and B can be set using a fine adjustment encoder. The user can switch between these two values, or an external source can be used via the trigger input. In dynamic operation the microcontroller switches between A and B according to programmed time and interval. For each value a pulse interval between 50μs and 100s can be set. In addition, a ramp up and down of between 30μs and 200ms can be set.
Elektro-Automatik