EAO Illuminated Push Button Switch for Use with Series 31
Teknik Belgeler
Özellikler
Marka
EAOŞununla Birlikte Kullanım İçin
Seri 31
IP Değeri
IP40
Maksimum Anahtarlama Gerilimi
250V ac
Montaj Tipi
Panel Montajı
Terminal Tipi
Lehim
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+55°C
Çalışma Sıcaklığı Aralığı
-25 → +55°C
Distrelec Product Id
13557566
Menşe
Switzerland
Ürün Ayrıntıları
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
EAOŞununla Birlikte Kullanım İçin
Seri 31
IP Değeri
IP40
Maksimum Anahtarlama Gerilimi
250V ac
Montaj Tipi
Panel Montajı
Terminal Tipi
Lehim
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+55°C
Çalışma Sıcaklığı Aralığı
-25 → +55°C
Distrelec Product Id
13557566
Menşe
Switzerland
Ürün Ayrıntıları
Illuminated Push Button Switch - EAO 31 Series
The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions.
The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting.
Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor.
All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance.
Standards
EN 61058