Yük Ayırıcı / Kesici, 6 Kutuplu, Kapalı Montaj, 13 kW, 32 A, NO/NC, IP65
Teknik Belgeler
Özellikler
Marka
EatonKutupların Sayısı
6
Maksimum Akım
32A
IP Değeri
IP65
Güç Değeri
13kW
Gerilim Değeri
400V ac
Kabul Edilen Asma Kilitler
Yes
Kol Rengi
Kırmızı
Normal Durum Yapılandırması
NO/NC
Uzunluk
180mm
Genişlik
100mm
Derinlik
100mm
Atım Yapılandırması
Tek
Terminal Tipi
Vida
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
United Kingdom
Ürün Ayrıntıları
Eaton Non-Fused Switch Disconnectors - T3 Series Rotary Switches
The T3 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
5.883,37 TL
Each (KDV Hariç)
7.060,04 TL
Each KDV Dahil
1
5.883,37 TL
Each (KDV Hariç)
7.060,04 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
EatonKutupların Sayısı
6
Maksimum Akım
32A
IP Değeri
IP65
Güç Değeri
13kW
Gerilim Değeri
400V ac
Kabul Edilen Asma Kilitler
Yes
Kol Rengi
Kırmızı
Normal Durum Yapılandırması
NO/NC
Uzunluk
180mm
Genişlik
100mm
Derinlik
100mm
Atım Yapılandırması
Tek
Terminal Tipi
Vida
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+40°C
Menşe
United Kingdom
Ürün Ayrıntıları
Eaton Non-Fused Switch Disconnectors - T3 Series Rotary Switches
The T3 series of switch disconnectors from Eaton are compact and robust. Rotary Cam Switches can be used for many switching and control applications, for example as ON-OFF, main, main/control, or instrument switches. The device consists of a hand actuator, the switch unit and the mounting accessories. This range of isolator switches is also suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.