Electromen OY, DC Motor Kontrol Birimi, 3 A, Panele Monte, 12 → 24 V dc
Teknik Belgeler
Özellikler
Marka
Electromen OYÜrün Tipi
DC Motor Kontrol Birimi
Çıkış Gerilimi
35 V
Besleme Gerilimi
12/24 V dc
Akım Değeri
3 A
Toplam Uzunluk
38mm
Toplam Genişlik
37mm
Toplam Derinlik
30 mm
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Menşe
Finland
Ürün Ayrıntıları
EM-185 DC Motor Speed Regulator
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
Electromen OYÜrün Tipi
DC Motor Kontrol Birimi
Çıkış Gerilimi
35 V
Besleme Gerilimi
12/24 V dc
Akım Değeri
3 A
Toplam Uzunluk
38mm
Toplam Genişlik
37mm
Toplam Derinlik
30 mm
Minimum Çalışma Sıcaklığı
0°C
Maksimum Çalışma Sıcaklığı
60°C
Standartlar/Onaylar
No
Menşe
Finland
Ürün Ayrıntıları
EM-185 DC Motor Speed Regulator
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, and there is also a load compensation (RxI) adjustment. Thanks to these features drive offers good performance in motor speed control applications. The current limit and the rpm range are adjustable with trimmer potentiometers. The power stage of the device is protected against short-circuit and overload (over temp.).The drive is easy to mount in a 10mm hole in an assembly panel.