Enerpac RC Tek Etkili Genel Amaçlı Hidrolik Silindir, 10T, 105mm Strok
Teknik Belgeler
Özellikler
Marka
EnerpacStrok
105mm
Kapasite
10t
Kapalı Yükseklik
171mm
Tek Etkili/Çift Etkili
Tek
Üretici Serisi
RC
Uzatılmış Yükseklik
276mm
Silindir Etkin Alanı
14.5cm²
Yağ Kapasitesi
152cm³
Dış Çap
57mm
Maksimum Çalışma Basıncı
700bar
Ağırlık
3.3kg
Menşe
China
Ürün Ayrıntıları
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
22.453,74 TL
Each KDV Hariç
26.944,49 TL
Each KDV Dahil
1
22.453,74 TL
Each KDV Hariç
26.944,49 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
EnerpacStrok
105mm
Kapasite
10t
Kapalı Yükseklik
171mm
Tek Etkili/Çift Etkili
Tek
Üretici Serisi
RC
Uzatılmış Yükseklik
276mm
Silindir Etkin Alanı
14.5cm²
Yağ Kapasitesi
152cm³
Dış Çap
57mm
Maksimum Çalışma Basıncı
700bar
Ağırlık
3.3kg
Menşe
China
Ürün Ayrıntıları
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.