Enerpac RC Tek Etkili Genel Amaçlı Hidrolik Silindir, 5T, 16mm Strok
Teknik Belgeler
Özellikler
Marka
EnerpacÜrün Tipi
General Purpose Hydraulic Cylinder
Strok Uzunluğu
16mm
Kapalı Yükseklik
41mm
Uzatılmış Yükseklik
57mm
Cylinder Effective Area
6.5cm²
Yağ Kapasitesi
10cm³
Maksimum Çalışma Basıncı
700 Bar
İşlem Tipi
Single Acting
Cylinder Capacity
5t
Dış Çap
58 mm
Ağırlık
1kg
Standartlar/Onaylar
No
Ürün Ayrıntıları
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.
Stok bilgileri geçici olarak kullanılamıyor.
25.062,78 TL
25.062,78 TL Each (KDV Hariç)
30.075,34 TL
30.075,34 TL Each KDV Dahil
1
25.062,78 TL
25.062,78 TL Each (KDV Hariç)
30.075,34 TL
30.075,34 TL Each KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
EnerpacÜrün Tipi
General Purpose Hydraulic Cylinder
Strok Uzunluğu
16mm
Kapalı Yükseklik
41mm
Uzatılmış Yükseklik
57mm
Cylinder Effective Area
6.5cm²
Yağ Kapasitesi
10cm³
Maksimum Çalışma Basıncı
700 Bar
İşlem Tipi
Single Acting
Cylinder Capacity
5t
Dış Çap
58 mm
Ağırlık
1kg
Standartlar/Onaylar
No
Ürün Ayrıntıları
Single-Acting, General Purpose
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.
Cylinders
Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.