FAG, Eğik Bilyalı Rulman, 3204-BD-2HRS-TVH, İç Çap: 20mm, Dış Çap: 47mm
Teknik Belgeler
Özellikler
Marka
FAGİç Çap
20mm
Dış Çap
47mm
Bilezik Genişliği
20.6mm
Bilyalı Mil Yatağı Tipi
Açısal Kontak
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Plastik
Sıraların Sayısı
2
Statik Yük Değeri
12900N
Dinamik Yük Değeri
20.6kN
İç Çap Tipi
Paralel
Clearance Code
CN
Bearing Series
2 Light
Partial Bearing Code
3204
Bilezik Tipi
Düz
Ürün Ayrıntıları
Double Row Angular Contact Ball Bearings
FAG from Schaeffler double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design. They differ in the size of their contact angle and the design of the bearing rings.
The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance free and, as a result, allow economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is small.
FAG
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
FAGİç Çap
20mm
Dış Çap
47mm
Bilezik Genişliği
20.6mm
Bilyalı Mil Yatağı Tipi
Açısal Kontak
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Plastik
Sıraların Sayısı
2
Statik Yük Değeri
12900N
Dinamik Yük Değeri
20.6kN
İç Çap Tipi
Paralel
Clearance Code
CN
Bearing Series
2 Light
Partial Bearing Code
3204
Bilezik Tipi
Düz
Ürün Ayrıntıları
Double Row Angular Contact Ball Bearings
FAG from Schaeffler double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design. They differ in the size of their contact angle and the design of the bearing rings.
The bearings are available in open and sealed versions. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields. Sealed bearings are maintenance free and, as a result, allow economical bearing arrangements. The self-alignment capacity of angular contact ball bearings is small.