Teknik Belgeler
Özellikler
Marka
FTDI ChipMontaj Tipi
Yüzeye Monte
Paket Tipi
SSOP
Pim Sayısı
28
Yükseklik
1.75mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Boyutlar
10.2 x 5.3 x 1.75mm
Genişlik
5.3mm
Genişlik
5.3mm
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
178,13 TL
Each (KDV Hariç)
213,76 TL
Each KDV Dahil
Standart
1
178,13 TL
Each (KDV Hariç)
213,76 TL
Each KDV Dahil
Standart
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 19 | 178,13 TL |
20 - 99 | 147,58 TL |
100 - 499 | 139,59 TL |
500 - 999 | 129,72 TL |
1000+ | 127,37 TL |
Teknik Belgeler
Özellikler
Marka
FTDI ChipMontaj Tipi
Yüzeye Monte
Paket Tipi
SSOP
Pim Sayısı
28
Yükseklik
1.75mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Boyutlar
10.2 x 5.3 x 1.75mm
Genişlik
5.3mm
Genişlik
5.3mm
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
FT232R - USB to Serial UART with Clock Generator, FTDI Chip
The FTDI Chip FT232R is a USB to serial UART interface with optional clock generator output. Asynchronous and synchronous bit bang interface modes are also available. Together with EEPROM, clock circuit and USB resistors effectively makes it a "3 in 1" chip for some applications. The internally generated clock (6 MHz, 12 MHz, 24 MHz, and 48 MHz) can be used to drive a microcontroller or external logic.
A unique number, the FTDIChip-ID, is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle. It can then be used to protect customer application software from being copied. Royalty-free drivers for the most common operating systems are available from FTDI website. http://www.ftdichip.com
The FT232R is available in compact 28-pin SSOP (RS 406-580) and 32-pin QFN (RS 730-0168) packages.