Georg Fischer PVC Motorlu Vana, 1,5inç
Teknik Belgeler
Özellikler
Marka
Georg FischerUyumlu Boru Boyutu
1-1/2inç
Bağlantı Noktalarının Sayısı
2
Maksimum Çalışma Basıncı
10 bar
Besleme Gerilimi
100 → 230 V ac
Gövde Malzemesi
PVC
Menşe
Switzerland
Ürün Ayrıntıları
PVC Ball Valve, Electrically Operated 100-230V - Imperial
A range of electrically operated ball valves using George Fischer’s Type 546 ball valve and EA11 electric actuator. Fitted with an emergency manual override, sturdy flame retardant body and thoroughly tested through 150,000 cycles the EA11 and 546 ball valve and electric actuator combination is tough and reliable.
The ball has been manufactured with a smooth finish ensuring a leak free fit whilst keeping the actuation force required to a minimum. A precisely engineered breakpoint in the stem ensures that if the worst should happen, media leaking outside the valve will be prevented. A dynamic backing seal design that ensures the ball seal remains in position and pressed against the ball always guarantees the fluid passage remains sealed tight regardless of pulsation or water hammer.
Available in both metric and imperial sizes to suit 3/8” to 1 1/2in and 16-50mm pvc-u connections and power supply that can adapt to 100-230V 50-60Hz.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
Georg FischerUyumlu Boru Boyutu
1-1/2inç
Bağlantı Noktalarının Sayısı
2
Maksimum Çalışma Basıncı
10 bar
Besleme Gerilimi
100 → 230 V ac
Gövde Malzemesi
PVC
Menşe
Switzerland
Ürün Ayrıntıları
PVC Ball Valve, Electrically Operated 100-230V - Imperial
A range of electrically operated ball valves using George Fischer’s Type 546 ball valve and EA11 electric actuator. Fitted with an emergency manual override, sturdy flame retardant body and thoroughly tested through 150,000 cycles the EA11 and 546 ball valve and electric actuator combination is tough and reliable.
The ball has been manufactured with a smooth finish ensuring a leak free fit whilst keeping the actuation force required to a minimum. A precisely engineered breakpoint in the stem ensures that if the worst should happen, media leaking outside the valve will be prevented. A dynamic backing seal design that ensures the ball seal remains in position and pressed against the ball always guarantees the fluid passage remains sealed tight regardless of pulsation or water hammer.
Available in both metric and imperial sizes to suit 3/8” to 1 1/2in and 16-50mm pvc-u connections and power supply that can adapt to 100-230V 50-60Hz.