Georg Fischer ABS Diyafram Vana, 3/4 inç Geçmeli, 10bar
Teknik Belgeler
Özellikler
Marka
Georg FischerBağlantı Tipi
Soket
Boru Çapı
3/4inç
Gövde Malzemesi
ABS
Bağlantı
3/4 inç Soket
Basınç Değeri
10bar
Flow Factor Kv
271L/min
Maksimum Çalışma Sıcaklığı
+60°C
Minimum Çalışma Sıcaklığı
-40°C
Çalışma Sıcaklığı Aralığı
-40 → +60 °C
Menşe
Switzerland
Ürün Ayrıntıları
Type 514 ABS Diaphragm Valves
Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.
Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content
Diaphragm Valves - PVC-U and ABS
10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
8.191,81 TL
Each KDV Hariç
9.830,17 TL
Each KDV Dahil
1
8.191,81 TL
Each KDV Hariç
9.830,17 TL
Each KDV Dahil
1
Toptan Satın Al
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 8.191,81 TL |
| 5+ | 7.941,12 TL |
Teknik Belgeler
Özellikler
Marka
Georg FischerBağlantı Tipi
Soket
Boru Çapı
3/4inç
Gövde Malzemesi
ABS
Bağlantı
3/4 inç Soket
Basınç Değeri
10bar
Flow Factor Kv
271L/min
Maksimum Çalışma Sıcaklığı
+60°C
Minimum Çalışma Sıcaklığı
-40°C
Çalışma Sıcaklığı Aralığı
-40 → +60 °C
Menşe
Switzerland
Ürün Ayrıntıları
Type 514 ABS Diaphragm Valves
Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.
Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content
Diaphragm Valves - PVC-U and ABS
10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.