Han Contacts Serisi Sıkıştırma Kontağı, Dişi, 16A, Ağır Hizmet Tipi Güç Konnektörleri İle Kullanım
Teknik Belgeler
Özellikler
Marka
HartingSeri
Han Contacts
Aksesuar Tipi
Sıkıştırma Kontağı
Şununla Birlikte Kullanım İçin
Heavy Duty Power Connector
Aralık
Han E GoldTec
Akım Değeri
16A
Minimum Wire Size mm²
1.5mm²
Cinsiyet
Dişi
Maximum Wire Size mm²
1.5mm²
Sonlandırma Yöntemi
Sıkıştırma
Menşe
Germany
Ürün Ayrıntıları
Han-Com®, Han D®, Han DD® ve Han® E Sıkıştırma kontakları
A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han-Com® Signal & Power (Crimp and Screw)
These Han- Com® inserts are available in current ratings from 10A to 100A. They are intended for use typically with hoods and housings; RS stock Nos. 181-0561, 181-0741, 181-0785, 363-8535, 363-8585 and their associated ranges. These hood and housing ranges are associated to a specific Harting 'Size' number identifier
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
100
Teklif İsteyiniz
100
Teknik Belgeler
Özellikler
Marka
HartingSeri
Han Contacts
Aksesuar Tipi
Sıkıştırma Kontağı
Şununla Birlikte Kullanım İçin
Heavy Duty Power Connector
Aralık
Han E GoldTec
Akım Değeri
16A
Minimum Wire Size mm²
1.5mm²
Cinsiyet
Dişi
Maximum Wire Size mm²
1.5mm²
Sonlandırma Yöntemi
Sıkıştırma
Menşe
Germany
Ürün Ayrıntıları
Han-Com®, Han D®, Han DD® ve Han® E Sıkıştırma kontakları
A range of high quality turned crimp contacts for Han-Com®, Han D®, Han DD® and Han® E inserts. The appropriate parallel action crimp to tool is also available for optimum crimp quality, as is the appropriate service crimp tool.
Warning
These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Approvals
UL, CSA, SEV
Han-Com® Signal & Power (Crimp and Screw)
These Han- Com® inserts are available in current ratings from 10A to 100A. They are intended for use typically with hoods and housings; RS stock Nos. 181-0561, 181-0741, 181-0785, 363-8535, 363-8585 and their associated ranges. These hood and housing ranges are associated to a specific Harting 'Size' number identifier