HellermannTyton Kablo İşaretleyici, Çeşitli Renkli, 0 → 9, Klipsli, 2mm → 2,8mm
Teknik Belgeler
Özellikler
Marka
HellermannTytonTutturma Yöntemi
Geçirerek Takma
Gösterge
0 → 9
Minimum Kablo Çapı
2mm
Maksimum Kablo Çapı
2.8mm
Renk
Çeşitli
Uzunluk
3mm
Genişlik
5 mm
Miktar
200
Yazdırılabilir
No
Malzeme
Poliamit
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Yangın Davranışı
Halojensiz
Seri
WIC1
Şunlara Dayanıklı
Titreşimler
Kablo Çapı Aralığı
2 → 2.8mm
Karşılanan Standartlar
RoHS2, UL94 V-0
Çalışma Sıcaklığı Aralığı
-40 → +85°C
Kit veya Aksesuar Tipi
Cable Marker
Menşe
France
Ürün Ayrıntıları
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
340,664 TL
1 Bag of 200 KDV Hariç
408,797 TL
1 Bag of 200 KDV Dahil
1
340,664 TL
1 Bag of 200 KDV Hariç
408,797 TL
1 Bag of 200 KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
HellermannTytonTutturma Yöntemi
Geçirerek Takma
Gösterge
0 → 9
Minimum Kablo Çapı
2mm
Maksimum Kablo Çapı
2.8mm
Renk
Çeşitli
Uzunluk
3mm
Genişlik
5 mm
Miktar
200
Yazdırılabilir
No
Malzeme
Poliamit
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Yangın Davranışı
Halojensiz
Seri
WIC1
Şunlara Dayanıklı
Titreşimler
Kablo Çapı Aralığı
2 → 2.8mm
Karşılanan Standartlar
RoHS2, UL94 V-0
Çalışma Sıcaklığı Aralığı
-40 → +85°C
Kit veya Aksesuar Tipi
Cable Marker
Menşe
France
Ürün Ayrıntıları
WIC Snap-on Cable Markers
WIC markers are applied to the wire by simply clicking them on using the WIC tool or if no tool is available they can easily be applied by hand. Simply insert the marker strip into the back of the tool and slide down to the end and simply press the marker down over the wire. Twist off the marker and apply the next marker. Once all the markers are on slide them together until the locking mechanism engages. The markers are on a dispenser that is colour coded (Red, Blue or Yellow) for the different sizes of markers. The applicator tool (which can be used with all 3 sizes of markers) is easy to use and designed for use in confined space.