Teknik Belgeler
Özellikler
Marka
IDEMBesleme Gerilimi
24V dc
Güvenlik Kontakları
2NC
Muhafaza Malzemesi
316 Stainless Steel
Bağlantı Tipi
2 m Kablo
Aktüatör Tipi
Master Coded
Yardımcı Kontaklar
NC
Güvenlik Kategorisi
4
Sensör Prensibi
Manyetik
Aktüatör Dahil
Yes
Anahtarlama Mesafesi
10 (Close) mm, 15 (Open) mm
Seri
MSA
IP Değeri
IP67, IP69K
Besleme Akımı
100mA
Yaklaşma Yönlerinin Sayısı
2
Derinlik
27mm
Genişlik
38mm
Uzunluk
95mm
Menşe
United Kingdom
Ürün Ayrıntıları
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
IDEMBesleme Gerilimi
24V dc
Güvenlik Kontakları
2NC
Muhafaza Malzemesi
316 Stainless Steel
Bağlantı Tipi
2 m Kablo
Aktüatör Tipi
Master Coded
Yardımcı Kontaklar
NC
Güvenlik Kategorisi
4
Sensör Prensibi
Manyetik
Aktüatör Dahil
Yes
Anahtarlama Mesafesi
10 (Close) mm, 15 (Open) mm
Seri
MSA
IP Değeri
IP67, IP69K
Besleme Akımı
100mA
Yaklaşma Yönlerinin Sayısı
2
Derinlik
27mm
Genişlik
38mm
Uzunluk
95mm
Menşe
United Kingdom
Ürün Ayrıntıları
IDEM MSA Standalone Coded Non Contact Switches
The MSA Non-contact Coded Switches have been developed as standalone mountable devices to provide a high level of fault detection and functional safety.
These non-contact switches can be mounted to guard doors to provide and maintain a high level of functional safety without the need to connect to a safety relay or safety controller. They have their own internal monitoring system and use force guided mechanical contacts which maintain PLe/Category 4 (ISO13849-1) even when the switches are connected in series.
Made from stainless steel 316 with a mirror polished (Ra4) surface finish these safety switches are suitable for CIP and SIP process applications and have IP69K ingress protection.
The typical sensing distance of the switch when it is "on" is 12mm, with wide tolerance to guard misalignment after setting.
Standards
High Functional Safety to ISO13849-1 - up to PLe/Cat 4. Conformance to EN60947-5-3 PDF-M.