Igus Lineer Rulman (Düz, Yarıklı veya Keçeli) RJUM-03-12
Teknik Belgeler
Özellikler
Marka
Igusİç Çap
12mm
Dış Çap
21.8mm
Uzunluk
31.9mm
Doğrusal Rulman Tipi
Doğrusal Düz Rulman
Statik Yük Değeri
6720N
Dinamik Yük Değeri
960N
Menşe
Germany
Ürün Ayrıntıları
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
Igusİç Çap
12mm
Dış Çap
21.8mm
Uzunluk
31.9mm
Doğrusal Rulman Tipi
Doğrusal Düz Rulman
Statik Yük Değeri
6720N
Dinamik Yük Değeri
960N
Menşe
Germany
Ürün Ayrıntıları
Self Compensating Bushing - Closed
Self Compensating,Uses a spherical area on the outer casing for self adjustment. Reductions in the load bearing capacity due to the self-adjusting function are thus avoided, because the shaft is always supported on the entire projected surface. Replacement liners are simply pushed into the aluminium housings.
Self-Lubricating Bushes - Drylin™
Drylin™ bearings are manufactured from high performance polymers. They run without lubrication and require no maintenance. They consist of a polymer liner located in an aluminium housing. Both standard and self-compensating styles are available in closed and split configurations. Features include very low friction, suitability for high speed and acceleration use, high load bearing capacity and self-wiping design. The bearings run on aluminium, steel and ceramic shafts.