INA, Eksenel Bilyalı Rulman, KH12PP, İç Çap: 12mm, Dış Çap: 19mm
Teknik Belgeler
Özellikler
Marka
INAİç Çap
12mm
Dış Çap
19mm
Bilezik Genişliği
28mm
Bilyalı Mil Yatağı Tipi
Doğrusal
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Poliamit
Sıraların Sayısı
1
Statik Yük Değeri
740N
Dinamik Yük Değeri
800N
İç Çap Tipi
Paralel
Partial Bearing Code
KH12PP
Bilezik Tipi
Düz
Menşe
Germany
Ürün Ayrıntıları
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
INAİç Çap
12mm
Dış Çap
19mm
Bilezik Genişliği
28mm
Bilyalı Mil Yatağı Tipi
Doğrusal
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Poliamit
Sıraların Sayısı
1
Statik Yük Değeri
740N
Dinamik Yük Değeri
800N
İç Çap Tipi
Paralel
Partial Bearing Code
KH12PP
Bilezik Tipi
Düz
Menşe
Germany
Ürün Ayrıntıları
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.